Sidechain compression in practice
Letting one sound make space for another — from the subtle ducking technique to the audible pumping effect.
Short answer
Sidechain compression routes one track's signal to control the compressor on another track. The most common application: the kick drum triggers the bass compressor, briefly ducking the bass on every kick hit to prevent frequency masking. At more extreme settings, it produces the rhythmic "pumping" sound that defines house and EDM. Both uses start from the same technique — only the settings differ.
How sidechaining works
A compressor has an internal detector circuit that measures the input level and triggers gain reduction when that level exceeds the threshold. In a standard compressor, the detector listens to the same signal it is compressing. In a sidechain configuration, the detector listens to a different signal — the sidechain input — while still applying gain reduction to the original signal.
The compressor on the bass track hears the kick. When the kick hits and exceeds the threshold, the compressor reduces the bass level. When the kick decays, the compressor releases and the bass returns to full volume. The bass audio is never interrupted — only shaped.
Ableton's sidechain documentation and Sound On Sound\u2019s sidechain techniques article provide DAW-specific setups with screenshots.
Kick and bass: the classic use case
Kick drum and bass guitar share low-frequency content — typically 40–120 Hz. When both play simultaneously at full level, they clash and create a muddy, indistinct low end. EQ helps (cutting the bass at the kick's fundamental frequency), but sidechaining is often more musical because it responds dynamically to the rhythm rather than applying a static cut.
The pumping effect
The characteristic "pumping" or "breathing" sound of house and EDM is sidechain compression applied aggressively to pads, synths or the full mix bus. The kick triggers deep gain reduction (10–20 dB) with a relatively slow release (200–400 ms). As the gain returns between kick hits, the mix swells — creating a rhythmic push and pull that drives the track forward.
Settings for pumping: fast attack (1–5 ms), slow release (200–400 ms), high ratio (10:1 or higher, or use a limiter-style ratio), low threshold. The release time determines the shape of the swell — shorter release gives a tighter snap back; longer release gives a smoother, more obvious pump.
Other sidechain applications
- Vocal ducking: a pad or guitar sidechain-triggered by the lead vocal automatically makes room when the vocal enters.
- De-essing with sidechain EQ: an EQ in the sidechain path emphasises sibilant frequencies (5–10 kHz), making the compressor react specifically to harshness in a vocal.
- Gated reverb: sidechain a noise gate on a reverb return with the dry snare as trigger — the reverb opens on each snare hit and gates shut immediately after. This is the iconic 1980s snare sound.
- Rhythmic effects: sidechain a synth pad with a hi-hat or percussion track to create a tremolo effect in time with the groove.
Key settings
The two most important parameters for sidechain compression are attack and release:
- Attack: how quickly the compressor responds to the trigger. Fast attack (1–10 ms) catches transients; slow attack lets them through.
- Release: how quickly gain returns after the trigger subsides. This defines the rhythm of the effect. Match release to a note value in the track using the Tempo & Delay calculator.
- Threshold: lower threshold = more frequent triggering. Set it so only genuine kick hits (not bleed or room sound) cross the threshold.
- Ratio: higher ratio = deeper ducking. 4:1 for subtle; 10:1+ for pumping.
Next step
Sidechain compression builds directly on the fundamentals covered in Compression without the mystery. If the threshold, ratio, attack and release concepts are new, read that guide first. For the frequency separation that sidechain complements, EQ basics covers the low-end clarity techniques that work alongside sidechaining in a finished mix. For deeper dives into sidechain use in electronic and dance music genres, Attack Magazine's Beat Dissected series analyses drum programming and sidechain application across house, techno, drum and bass and other electronic styles with audio examples.
Frequently asked questions
Sidechain compression is a technique where the compressor on one track responds to the signal from a different track — the "sidechain" input — rather than its own signal. The most common use is the kick drum triggering the compressor on the bass guitar, so every kick hit momentarily lowers the bass volume and creates space in the low end.
The pumping effect is an exaggerated sidechain compression where the kick drum trigger causes the entire mix (or the pads/synths) to duck dramatically and then rise back. It creates a rhythmic swelling sensation. House, techno and many EDM genres use it as a deliberate stylistic choice, not a problem to be corrected.
In most DAWs, place a compressor on the track you want to duck (e.g. bass). Find the sidechain input option in the compressor (sometimes called "key input" or "external sidechain"). Route the kick drum track as the sidechain source. Set the attack fast (1–5 ms) and the release to match the kick's decay or the tempo (use the Tempo & Delay calculator). Adjust threshold and ratio until the ducking is audible but musical.
Yes. A common technique is to use a silent or very quiet "ghost" kick track — a simple kick sample or sine wave at very low volume — purely as the trigger. This lets you control the sidechain timing and shape independently of the kick that appears in the mix.
A compressor reduces volume proportionally once a threshold is crossed. A gate cuts volume completely below a threshold and opens fully above it. A sidechain gate (triggered by an external signal) is often used for gated reverb effects — famously the gated snare sound of 1980s pop records.