Tempo-synced delays: timing echoes to the beat
How to convert a BPM value into delay times so your echoes land in rhythm, not against it.
Short answer
Divide 60,000 by the tempo in BPM to get one quarter-note delay in milliseconds. Halve it for eighth notes; multiply by 1.5 for dotted eighths. The Tempo & Delay tool calculates every note value automatically — tap the tempo or type it in, and use the result in your delay plugin.
Why sync delays to tempo
A delay effect repeats the input signal after a set time. If that time has no relationship to the musical pulse, the echoes land between beats and create rhythmic clutter — particularly noticeable on vocals, guitars and synth leads, where the echo competes with the melody.
When the delay time matches a musical note duration, repeats fall on the grid. The echo reinforces the rhythm rather than fighting it, and you can push the feedback higher (more repeats) before the mix becomes dense.
This technique is used across genres. Listen to the guitar delay on U2 tracks (notably Where the Streets Have No Name, which uses a dotted eighth) or the vocal delays in most modern pop — in both cases the echoes are timed to the track. For an academic perspective, Sound On Sound's production techniques library covers the topic in detail.
The formula
One minute contains 60,000 milliseconds. If there are n beats per minute, each beat lasts:
Quarter note (ms) = 60,000 ÷ BPM At 120 BPM: 60,000 ÷ 120 = 500 ms per quarter note.
At 90 BPM: 60,000 ÷ 90 ≈ 666.7 ms per quarter note.
All other note values are fractions or multiples of the quarter note:
- Half note: quarter note × 2
- Eighth note: quarter note ÷ 2
- Sixteenth note: quarter note ÷ 4
- Dotted note: note value × 1.5 (dotted = note + half of note)
- Triplet note: note value × ⅔
Use the Tempo & Delay tool to get all values at once — type the BPM or tap the button and every common note value appears instantly.
Common note-value delay times at standard tempos
| Note value | 90 BPM (ms) | 120 BPM (ms) | 140 BPM (ms) |
|---|---|---|---|
| Quarter note | 667 | 500 | 429 |
| Dotted quarter | 1,000 | 750 | 643 |
| Eighth note | 333 | 250 | 214 |
| Dotted eighth | 500 | 375 | 321 |
| Sixteenth note | 167 | 125 | 107 |
| Quarter triplet | 444 | 333 | 286 |
| Eighth triplet | 222 | 167 | 143 |
Values rounded to the nearest millisecond. Use the Tempo & Delay tool for exact values at any BPM.
Dotted and triplet delays
The dotted eighth note delay (375 ms at 120 BPM) is perhaps the single most-used delay time in pop and rock production. It creates a rolling, slightly off-beat echo that fills space between notes without landing exactly on the beat — which would feel mechanical. The U2 Edge sound is the canonical example; Waves H-Delay and similar plugins can display delay times in note values if you set them to tempo-sync mode.
A triplet delay divides the beat into three equal parts rather than two. At 120 BPM, an eighth-note triplet delay is 167 ms. Triplet delays work naturally in swing-time tracks and hip-hop, where the underlying grid is already ternary.
Workflow: from BPM to mix
- Find or set your track's BPM. Use the Metronome tap-tempo feature if the BPM is not yet defined.
- Open the Tempo & Delay tool and enter the BPM. Note the dotted eighth and quarter note values.
- In your DAW, set the delay plugin to the desired ms value (or use note-sync mode if available).
- Set feedback to one or two repeats initially. Raise it gradually until the echo supports rather than dominates the sound.
- Apply a high-pass filter on the delay return to remove low-frequency build-up on dense mixes — most delays add a filter option, or route the return to an EQ plugin. See the EQ basics guide for filter technique.
- Check the delay against the full mix, not just in solo — an echo that sounds great alone often clutters a busy arrangement.
Next step
Now that your delays lock to the tempo, explore how dynamic processing shapes the character of what you are delaying. Compression without the mystery covers threshold, ratio, attack and release — the same principles apply to keeping a delayed signal controlled and musical. For broader DAW technique, Ableton's official video lessons and the Sound On Sound Techniques archive are both authoritative free resources.
Frequently asked questions
A tempo-synced delay is a delay effect whose repeat time is set to match the tempo of the track. Instead of setting a delay time in milliseconds by ear, you calculate the ms value that corresponds to a musical note duration — a quarter note, eighth note, dotted eighth, and so on — at the track's BPM. The result is that echoes land on the beat rather than clashing with it.
Divide 60,000 ms by the BPM to get the length of one quarter note in milliseconds. For example, at 120 BPM: 60,000 ÷ 120 = 500 ms per quarter note. For an eighth note, halve the result (250 ms). For a dotted eighth, multiply the eighth note value by 1.5 (375 ms at 120 BPM). The Tempo & Delay tool on this site calculates all common values automatically.
The dotted eighth note delay (375 ms at 120 BPM) is extremely common in pop, rock and electronic music because it creates a rolling rhythmic feel without cluttering the beat. Quarter note delays give a steady echo that reinforces the pulse. Triplet delays (one third of a quarter note) work well for swing and hip-hop.
Yes. Most modern DAWs including Ableton Live, Logic Pro X, FL Studio and Reaper allow delay plugins to sync to the project BPM in note values rather than milliseconds. If your delay plugin only accepts milliseconds, use the Tempo & Delay calculator to find the right value and enter it manually.
Pre-delay is a short gap before the reverb tail begins. Setting pre-delay to a rhythmically meaningful value — typically 30–80 ms, equivalent to a 32nd or 16th note at moderate tempos — separates the dry signal from the reverb so the attack of each note stays clear. The same BPM-to-ms formula applies.
For most musical uses, within a few milliseconds of the calculated value is fine — human rhythmic perception is not precise to the millisecond. However, when delays run for many repeats, small timing errors accumulate and can drift noticeably out of phase with the beat. For critical applications, use your DAW's note-sync mode if available.