PRODUCTION Reviewed Oct 2026

Compressor

A <strong>compressor</strong> is a processor that turns a signal down once it passes a set level, narrowing the gap between loud and quiet. <strong>Compression in music explained</strong> simply: a compressor automatically reduces the volume of loud peaks, making the overall level more consistent. Understanding <strong>audio compressor settings</strong> — threshold, ratio, attack, release and make-up gain — is essential for mixing.

In practice

The key <strong>audio compressor settings</strong>: threshold (the level above which compression starts), ratio (how much the signal is reduced — 4:1 means a signal 4 dB over threshold comes out only 1 dB over), attack (how fast the compressor responds after the signal exceeds the threshold), release (how fast it stops compressing after the signal drops below the threshold) and make-up gain (restoring the overall level after compression). <strong>Compression in music explained</strong> in practice: on vocals, gentle compression (3:1 ratio, medium attack) evens out volume differences between words; on drums, fast attack tames transient peaks while slow attack lets the snap of the stick through; on a mix bus, light glue compression (2:1, slow attack, auto release) helps the entire mix feel cohesive. <strong>Dynamic range compression</strong> is used on virtually every track in modern commercial music. For a beginner-friendly guide to compression, see <a href="https://www.berklee.edu/music-production-engineering" target="_blank" rel="noopener noreferrer">Berklee's production resources</a>.

Standard term: Dynamic range compression

Frequently asked questions